Feeders & FeedCon
What network is needed to use FeedCon®?
FeedCon versions 1 & 2 only use the 2G network for communication. FeedCon version 3 (purchased after 07/01/2023), uses LTE Cat-M1 with 2G fallback.
Can I change the subscription level on FeedCon®?
Yes, you can always change the subscription level on FeedCon®. How to change/upgrade your subscription in the Nordic Gamekeeper app: Log in with your username and password. Check and update your prof…
Why doesn't Bluetooth work with the remote control on FeedCon®?
If you're experiencing issues with Bluetooth not working when using the remote control function on your FeedCon®, there are several things you can check: Check your subscription: The Bluetooth featur…
Which battery is compatible with Nordic Gamekeeper feeders?
To ensure optimal performance, we recommend using a rechargeable 12 Volt battery with a minimum of 4.5 Amp hours (Ah) for your FeedCon®. In our own feeders, we use a 75 Ah marine/leisure battery. The…
How do I change the schedule time on my feeder?
If you're looking to change a schedule time on your feeder using FeedCon®, here are the steps: Open the Nordic Gamekeeper app. Select the feeder for which you want to change the schedule time. Naviga…
How can I enable Astro mode on my feeding schedule for my feeder?
To enable the astro-mode for your feeder, follow these steps: Ensure that you have allowed location access for the Nordic Gamekeeper app in your mobile device settings. Open the Nordic Gamekeeper app…
How do I connect NG-SIM® to my already installed FeedCon®?
If you're trying to connect your NG-SIM® to an already installed FeedCon® device, follow the steps: Open the Nordic Gamekeeper app. Log in with your username and password. Choose your NG-SIM® device.…
How to calibrate FeedCon®?
For a correct calibration of FeedCon: Disconnect the battery cables from the battery. Wait one minute. Connect the the battery cables to the battery again. NOTE! If you have a old version of FeedCon…
How do I connect Nordic Gamekeeper Cloud Camera to my already installed FeedCon®?
If you want to connect your Nordic Gamekeeper Cloud Camera to your already installed FeedCon®, follow the steps: Open the Nordic Gamekeeper app. Log in with your username and password. Choose your No…
How does the communication between FeedCon® and the Nordic Gamekeeper app work?
The FeedCon® system updates its settings and receives data every six hours by connecting to the server. If you make changes to the feeding schedule in the Nordic Gamekeeper app, the changes will take…
If I want to test my FeedCon® out in the field, how do I do it?
If you want to test your FeedCon® in the field, disconnect the power cables and then connect them again after 1 minute, then initiate a calibration in the Nordic Gamekeeper app. This will cause the m…
Why can't I choose Astro mode with FeedCon®?
If you are unable to choose the Astro-mode on you FeedCon, follow these steps: Subscribe to the Standard or Premium plan: To use the Astro Mode with your FeedCon®, make sure you have an active Standa…
Is FeedCon® compatible with all feeders on the market?
Yes, you can use FeedCon® with any timer-controlled feeders on the market that use a 12-volt power supply. It is compatible with all brands and models. FeedCon® is designed to be versatile and adapta…
How much power can the FeedCon® handle from a solar panel?
The FeedCon® can handle sizes of solar panels up to 50W.
Can I move FeedCon® between different feeders/brands?
Yes, FeedCon® can be transferred to different feeders/brands. It is important to perform a calibration of the device in the Nordic Gamekeeper app when it is connected to the new feeder.
What do I need to do to get my FeedCon® started?
To set up your FeedCon® using the Nordic Gamekeeper app: Download the app from the App Store (for iPhone) or Play Store (for Android). Open the app and register an account. After registering, you wil…
What kind of battery can I use to connect to FeedCon®?
To ensure optimal performance, we recommend using a rechargeable 12 Volt battery with a minimum of 4.5 Amp hours (Ah) for your FeedCon®. In our own feeders, we use a 75 Ah marine/leisure battery. The…
How much power does FeedCon® consume?
FeedCon® has low power consumption, typically around 7-8 milliamps, which is minimal in comparison to operating the motor, lighting, and self-discharge of the battery. For example, a 75AH leisure/mar…
How weatherproof is FeedCon®?
FeedCon® is highly resistant to water damage as the circuit board is protected by a special coating that is extremely resistant to moisture and water.
Is FeedCon® theft-proof?
Yes, FeedCon® is equipped with a theft-proof feature that allows the owner/user to lock the device if it goes missing. If the device is found, the user can easily unlock it again.
Do I need to buy a SIM card to use FeedCon®?
No, you do not need to buy a separate SIM card to use FeedCon®. Upon purchase, FeedCon® is already activated and comes with a one-month subscription included. The device has a built-in SIM card (also…
How many kg does the feeders hold?
The Nordic Gamekeeper feeders can hold: In 125 liters: about 100 kg (220 pounds) of corn or about 75 kg (165 pounds) of wheat/barley In 250 liters: about 200 kg (440 pounds) of corn or about 150 kg (…
How many days does the feed last in the feeders?
With normal settings, the feeder spreads 1 kg of feed in 4 seconds (with corn), if you spread 4 kg in one day, you have feed for approximately 50 days on a 250 liter feeder, 125 days on a 500 liter f…
What is the total height of the feeders?
The total heights of the Nordic Gamekeeper feeders are: 125 liters – 195 cm (6.4 feet) 250 liters – 195 cm (6.4 feet) 500 liters – 205 cm (6.7 feet) 1000 liters – 250 cm (8.2 feet)
How do I activate food save mode on my feeder with activity sensor?
If you want to activate the food save mode on your feeder with an activity sensor, follow these steps: Open the Nordic Gamekeeper app on your device. Go to the feeder with the activity sensor mounted…
How do I add a schedule time on my feeder with FeedCon®?
If you're looking to add a schedule time on your feeder using FeedCon®, here are the steps: Open the Nordic Gamekeeper app. Select the feeder for which you want to add a schedule time. Navigate to th…
How do I activate food save mode on my feeder/FeedCon with an activity sensor?
To activate food save mode on your feeder/FeedCon with an activity sensor, follow these steps: Open the Nordic Gamekeeper app on your device. Go to the feeder with the activity sensor mounted on. Sel…
What is the Nordic Gamekeeper gallery?
The Nordic Gamekeeper gallery is a well-sorted gallery in the Nordic Gamekeeper application. Once your camera is connected to the Nordic Gamekeeper App, all of your images will be sent and neatly org…
How do I connect a trail camera to my already installed FeedCon®?
Each FeedCon® has its own image gallery. It's easy to send or save pictures you want to keep from the picture gallery. To add a camera to your FeedCon® gallery: Go to the Nordic Gamekeeper app. Open…
What happens if my subscription expires?
When the subscription has expired, the distribution on your feeder stops. You will then have to renew your subscription to make your feeder start again. How to renew your subscription using the Nordi…
How many FeedCon® devices can I connect to my account in the NG app?
You can connect an unlimited number of FeedCon® devices to your account in the Nordic Gamekeeper app. With the ability to connect an unlimited number of FeedCon® devices to your account, you can easi…
What happens if I plug in the wrong cord in the wrong pins in FeedCon®?
Nothing will happen if you accidentally plug in the wrong cord in the wrong pins in FeedCon®. The device has a built-in safety system to prevent short circuits or faults if something is connected inc…
