How do I format my Cloud Camera?

Claes Updated by Claes

The Cloud Camera can be formatted in two different ways:

Using the "F" button on the Cloud Camera:

To reformat your Cloud Camera using the built-in "F" button, please follow the steps below carefully:

  • Turn off the camera:
    • Locate the power switch on your Cloud Camera.
    • Ensure that it is set to the "OFF" position.
  • Activate test mode:
    • Slide the switch to the position labeled "TEST".
  • Wait for the lights:
    • Observe the lights/LEDs on the camera.
    • Wait until all the lights are activated and illuminated.
  • Format the camera:
    • Now, press and hold the "F" button until all four LEDs change color and turn red.
    • Once this happens, release the "F" button.
  • Confirmation:
    • If all LEDs are red, the formatting has been successful. Your Cloud Camera is now reformatted and ready for use again.

Via SD card:

  • Remove the SD card from the camera and insert it into a computer or SD card reader.

To format the SD card on a Windows computer:

  • Connect the SD card to your computer using a card reader.
  • Open "This PC" or "File Explorer".
  • Right-click on the SD card icon and select "Format..." from the dropdown menu.
  • In the window that appears, ensure the correct file system is chosen. For most SD cards, "FAT32" or "exFAT" should be appropriate.
  • Deselect the "Quick Format" checkbox if you wish to perform a full format.
  • Click "Start" and confirm that you want to format the card when the warning dialogue appears.
  • Wait until the formatting process is complete, then click "OK".
  • Now, remove the SD card from your computer and place it back into your Cloud Camera.

How did we do?

How does the payment of an NG-SIM® subscription work?

How do I update my payment method for my subscription?

Contact